Siemens CF62 Operating Instructions

© Siemens AG 2003, I:\Mobil\R65\CF62_v2\en\_von_itl\sug\A65_Setup.fm
Setup46
VAR Language: English; VAR issue date: 08-Januar-2004
left page (46) of CF62 Leopard en, A31008-H6050-A1-2-7619 (19.01.2005, 16:24)
If necessary, check with your service
provider for details. Current settings
for each service provider may be
found in the Internet under
www.siemens-mobile.com/
customercare in the FAQ section.
I
Select profile.
E
Open menu, then press
Change sett.
If necessary enter CSD settings and
GPRS settings (your service provider
will supply you with information on
this if necessary):
§Options§ Open, select Change sett.
K
§Edit§ and enter data.
§Save§ Save settings.
§Menu§
KmKConnectivity
KSelect function.
HTTP profile
I
Select profile.
Fax/data
Rec fax/data b
The call is signalled by a special ring-
tone and the type of call (fax or data)
is displayed. Now start the commu-
nication program in your PC to re-
ceive the fax/data.
Send voice/fax
b
To switch from voice mode to fax
mode, set the function on the phone
before transmission.
Rec voice/fax
After starting the PC communication
program, activate the function during
a call.
End transmission
End transmission with PC software
and/or press
B
.

Siemens CF62 Specifications

General

Brand	Siemens
Model	CF62
Category	Cell Phone
Language	English