Siemens CL75 - Getting started; Inserting the SIM card and battery

© Siemens AG 2003, D:\Werkstatt\CL75 am fcc\S_WEGA_Startup.fm
9Getting started
VAR Language: en; VAR issue date: 050210
left page (9) of S_Wega CL75 am, A31008-H1550-A40-1-7619 (10.03.2005, 15:21)
Getting started
Inserting the SIM card/
battery
The service provider supplies you
with a SIM card on which all the im-
portant data for your line is stored. If
the SIM card has been delivered in
credit-card size, snap the smaller
segment out and remove any rough
edges.
• Slide backward to open the door
of battery compartment. Push the
battery towards the hinge and lift
it up.
Notice the SIM card direction
1.
• Insert the SIM card into the slot
with the contact surface facing
downwards (ensure that the cham-
fered corner is in the correct
position).
• Insert the battery back to the
phone
2, then press it down-
wards until it engages
3.
Additional Information
Please power off your phone before remov-
ing the battery!
Only 3 V SIM cards are supported. Please
contact your service provider if your SIM
card wore out.
1
3
2