21 / 38
Siemens
Climatix HMI-TM CB1P3917en02
Building technologies 3BFunctions and operations 2015-07-02
4.7 Parameter list
Press key UP/DOWN to browse the parameter information. The parameter list
page is displayed as follows:
Select the parameter and press key ENTER to enter a new page for value editing.
A dedicated page is used to edit integer or float type of value. On the value-editing
page, press key UP/DOWN to change the value as follows:
If “null value supported” is selected during the template creation, a separate scale
will appear to the right of the ruler.
If the separated scale (null value) is selected, the value will become asterisks.
integer and
To Next Page
Loading...
