To Next PageTo Next Page
Need help?Do you have a question about the Siemens CP-8000 and is the answer not in the manual?
General| Product type designation | CP-8000 |
|---|---|
| Category | Controller |
| Supply voltage | 24 V DC |
| Power Supply | 24 V DC (typically with a range of 20.4 to 28.8 V DC) |
| Protection Class | IP20 |
| Type | Programmable Logic Controller (PLC) |
| Programming Languages | IEC 61131-3 (Ladder Diagram, Function Block Diagram, Structured Text, Instruction List, Sequential Function Chart) |
| Operating Temperature | 0 to +50 °C (32 to 122 °F) |
| Storage Temperature | -25 to +70 °C (-13 to +158 °F) |
| Relative Humidity | 5 to 95% (non-condensing) |
Explains formatting conventions for referring to manuals, screen outputs, inputs, menu positions, and texts.
Details safety measures, warning symbols, and keywords indicating degrees of danger.
Introduces the core hardware components of the SICAM A8000 series.
Provides a detailed comparison of general features and communication capabilities across models.
Details the various modules available for the system, including power supply and master modules.
Explains the functionality of the central processing unit and its role in the system.
Introduces the software tools available for configuring, diagnosing, and testing the devices.
Outlines general functions and basic services required by other function packages.
Details the configuration and use of IPSec VPN for secure remote communication.
Describes telecontrol functions, including communication protocols and data management.
Specifies the protection types (IP rating) and protection classes according to IEC standards.
Details the electromagnetic compatibility properties based on system properties and standards.
Details the power consumption for master modules and the total system.
Lists the supported standard and third-party protocols and their associated interfaces.
Describes the physical housing, dimensions, and mounting features of the devices.
Provides specifications for wiring, including conductor cross-sections and cable types.
Introduces the available software tools for engineering and highlights their differences.
Details the physical and logical connection options for engineering.
Provides a guide to telecontrol configuration tasks using SICAM TOOLBOX II.
Explains the process of creating application programs using function diagrams and instruction lists.
Outlines the tasks for telecontrol configuration using the SICAM WEB interface.
Covers essential settings for working with SICAM WEB, including authentication and IP configuration.
Details settings for time synchronization, including NTP/SNTP client and daylight saving rules.
Describes the front panel elements like LEDs and the LCD display for CP-8000.
Explains the different error types and how to use the diagnosis functions.
Provides instructions on how to update firmware for system elements.
Lists the primary hardware components and their article numbers.
Details the available SICAM I/O modules with their designations and article numbers.
Lists the software tools required for engineering, including SICAM TOOLBOX II and WEB.
Demonstrates transferring input signals to output commands and signaling.
Explains how to implement bounce suppression for input signals using counters and logic.
Provides a troubleshooting table for common errors encountered during SICAM WEB engineering.
Step-by-step guide for modem installation and network configuration in Windows 8.
Instructions for establishing a new data-communication connection.
Illustrates a basic application of the device as a telecontrol substation.
Details the configuration for secure communication using IPSec VPN.
