Siemens CP-8000 User Manual

SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual Unrestricted 165
DC8-037-2.02, Edition 10.2017
6 Installation and Circuitry
Contents
6.1 Mechanical Design ....................................................................................... 166
6.2 Dimensions .................................................................................................. 171
6.3 Installation Location and Position .................................................................. 173
6.4 Mounting CP-8000........................................................................................ 175
6.5 Mounting CP-802x ........................................................................................ 187
6.6 Memory Cards .............................................................................................. 194
6.7 Wiring ........................................................................................................... 196
6.8 Switching the Device On and Off .................................................................. 198
6.9 Block Diagrams and External Circuitry .......................................................... 199
6.10 Interfaces ..................................................................................................... 207
6.11 Installation of External Communication Connections ..................................... 212
This chapter describes the mechanical design of CP-8000/CP-802x and how the installation
and wirings are to be accomplished.
This chapter shows further how the various communication methods can be realized by
means of the standard modems and special cables.

Siemens CP-8000 Specifications

General

Product type designation	CP-8000
Category	Controller
Supply voltage	24 V DC
Power Supply	24 V DC (typically with a range of 20.4 to 28.8 V DC)
Protection Class	IP20
Type	Programmable Logic Controller (PLC)
Programming Languages	IEC 61131-3 (Ladder Diagram, Function Block Diagram, Structured Text, Instruction List, Sequential Function Chart)
Operating Temperature	0 to +50 °C (32 to 122 °F)
Storage Temperature	-25 to +70 °C (-13 to +158 °F)
Relative Humidity	5 to 95% (non-condensing)