Siemens CP-8000

Preparing the Engineering
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual Unrestricted 253
DC8-037-2.02, Edition 10.2017
7.7.1.1.2 Serial Connection via Telecommunication Facilities
Engineering PC and CP-8000 are connected via the serial interface (X2) via modems and al-
ternatively via a dedicated line, the public fixed network, or wireless radio.
With CP-802x, a special modem cable (or standard patch cable and D-sub/RJ45 adapter)
must be used.
Note
The circuitry of the modem cable (alternatively D-sub/RJ45 adapter) is dependent on the used modem.
You will find the corresponding circuitries in section 6.11.1, Serial Communication.
TOOLBOX II
Revision:
License Pak:
Version 5 | Siemens AG
F4
F3
F2
F1
POK
RY
ER
ETH
LK1
PK1
RS-2 32
OH2
RS-4 85
OH3
ETH
LK4
PK4
SD
X4
Modem
Modem
SICAM TOOLBOX II
CP-8000
serial
serial
Direct cable
Line, PSTN, GSM, ...
TOOLBOX II
Revision:
License Pak:
Version 5 | Siemens AG
Modem
Modem
SICAM TOOLBOX II
CP-802x
D-Sub/RJ45
adaptor
serial
serial
Standard patch cable
max. 1.8 m
Line, PSTN, GSM, ...