Siemens CP-8000 User Manual

System Components and Technical Data
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual Unrestricted 163
DC8-037-2.02, Edition 10.2017
5.7.3.9 AO-6380
5.7.3.9.1 Functions
• Setpoint values by means of currents and voltages
─ Output via analog outputs of a SM-0572
ta
─ Output range settable with a resloution of
ta
− 12 bits + sign at ±20 mA/±10 V
− Shrinking the range results in decreasing resolution
─ Application functions and procedures according to IEC 60870-5-101/104
ta
− Formal check
− Direct command
− Select and execute command ("select/execute")
─ Adaptation
t
− Linear (normalized, technologically scaled or short floating point)
t
─ Selectable behavior on communication failure and module failure
ta
(keep value, output substitute value)
─ Spontaneous transmission
t
or
─ Periodical transmission
a

Siemens CP-8000 Specifications

General

Product type designation	CP-8000
Category	Controller
Supply voltage	24 V DC
Power Supply	24 V DC (typically with a range of 20.4 to 28.8 V DC)
Protection Class	IP20
Type	Programmable Logic Controller (PLC)
Programming Languages	IEC 61131-3 (Ladder Diagram, Function Block Diagram, Structured Text, Instruction List, Sequential Function Chart)
Operating Temperature	0 to +50 °C (32 to 122 °F)
Storage Temperature	-25 to +70 °C (-13 to +158 °F)
Relative Humidity	5 to 95% (non-condensing)