36 / 38
Siemens Climatix HMI-TM CB1P3917en02
Building Technologies 3BFunctions and operations 2015-07-02
5. Select Firmware Update and press key ENTER → key DOWN → key
ENTER orderly to select Yes.
6. Press key ENTER and wait until the "Firmware Updating ..." appears on
the screen.
The HMI-TM will reboot after the downloading is finished.
Flash memory of HMI-TM has been expanded for VVS10 development. If the
firmware version of HMI-TM is V9.12B0028 or lower, a temporary firmware version
file V9.14B0030 is required as a bridge to upgrade to V10.XXB00YY.
Follow Firmware update process as above.
Do not unplug the cable or power off the controller during the updating process.
To Next Page
Loading...
Need help?
General
