Note
The synchronization modules do not have a UL listing, but a c-UR-us approval (component
approval).
Note for Australia - RCM
The product meets the requirements of the RCM standard.
Applied standards:
● AS/NZS CISPR11 (Industrial, scientific and medical equipment - Radio-frequency
disturbance characteristics - Limits and methods of measurement).
● EN 61000-6-4 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards -
Emission standard for industrial environments
You will find the current versions of the standards in the currently valid RCM SDoCs (Self-
Declaration of Conformity).
MSIP 요구사항 ‑ For Korea only
A급 기기(업무용 방송통신기자재)
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기 바라며,
가정 외의 지역에서 사용하는것을 목적으로 합니다.
Marking for the customs union
EAC (Eurasian Conformity)
Eurasian Economic Union of Russia, Belarus, Armenia, Kazakhstan and Kyrgyzstan
Declaration of conformity according to the technical regulations of the customs union (TR ZU)
FDA and IEC marking
The synchronization modules fulfilled the FDA and IEC requirements listed below:
● Class 1 LASER PRODUCT
Mechanical stability (in operation)
IEC 60068-2-6 vibration IEC 60068-2-27 shock
5 – 9 Hz: 3.5 mm
9 – 150 Hz: 1 g
1 octave/min, 20 sweeps
15 g, 11 ms duration
6 shocks per axis
Synchronization modules ● ●
Approvals
Synchronization modules for S7-400H
Equipment Manual, 04/2020, A5E50072434-AA 33
To Next Page
Loading...
Need help?
General
