Siemens CT636LE.1

47
en
Service programmes
Descaling
Takes about 21 minutes�
■ Press button E�
■ Turn the rotary selector to select
“Descale”�
■ Press button C� Display indi-
cates progress of the programme�
■ Empty drip trays and replace�
■ Remove water lter(if there is one) and
press C�
■ Pour lukewarm water into the empty
water tank up to the “0�5 l” mark and then
dissolve one Siemens descaling tablet
TZ80002 in it�
F
If there is not enough descaling
solution in the water tank, you will
be asked to do the following. Refill
using uncarbonated water and press
C again�
■ Remove the suction pipe from milk
container, wipe it and insert the end of the
suction pipe into the hole on the co󰀨ee
grounds container�
■ Close the appliance door�
■ Place a container with a capacity of
0�5 litre under the beverage outlet�
■ Press button C� The descaling
programme will now run for about
19 minutes�
■ Remove the container and press
C�
■ Rinse the water tank and (if removed)
replace the water lter.
■ Fill the tank with fresh water up to the
“max” indicator�
■ Replace the water tank and close the
door�
■ Place the container underneath the bev-
erage outlet again�
■ Press button C� The desca-
ling programme will now run for about
2 minutes and rinse the appliance�
■ Remove the container, empty the drip
trays, replace and close the appliance
door�
■ Press C� The appliance has
nished descaling and is ready for use
again�
■ Press E to exit the program�
Cleaning
Takes about 5 minutes�
■ Press button E�
■ Turn the rotary selector to select “Clean”�
■ Press button C� Display indi-
cates progress of the programme�
■ Clean the beverage outlet and replace,
empty the drip trays and replace�
■ Open the ground co󰀨ee drawer, drop in
a cleaning tablet and close the co󰀨ee
drawer again�
■ Close the appliance door�
■ Place a container with a capacity of
0�5 litre under the beverage outlet�
■ Press button C� The cleaning
programme will now run for about
5 minutes�
■ Remove the container, empty the drip
trays, replace and close the appliance
door�
■ Press C� The appliance has
nished cleaning and is ready for use
again�
■ Press E to exit the program�
calc’nClean
Takes about 26 minutes�
calc’nClean combines the functions Descale
and Clean� If both programmes are due
to be carried out close together, the fully
automatic co󰀨ee machine will automatically
suggest this service programme�
■ Press button E�
■ Turn the rotary selector to select
“calc’nClean”�
■ Press button C� The display
indicates the progress of the programme�
■ Clean the beverage outlet and replace,
empty the drip trays and replace�
■ Open the ground co󰀨ee drawer, drop in
a cleaning tablet and close the co󰀨ee
drawer again�
■ Remove the water lter (if there is one)
and press C