Need help?Do you have a question about the Siemens DRIVE-CLiQ and is the answer not in the manual?
General| Interface | DRIVE-CLiQ |
|---|---|
| Category | Media Converter |
| Connector Type | RJ45 |
| Protection Class | IP20 |
| Transmission Rate | 100 Mbit/s |
| Relative Humidity | 5 to 95% (non-condensing) |
| Storage Temperature | -40°C to +70°C |
Specifies the approved applications, environmental conditions, and operating limits of the encoder.
Provides broad safety guidelines for electrical hazards, equipment damage, security, and residual risks.
Identifies residual risks associated with drive systems, including unintentional movements and environmental factors.
Provides critical procedures for safely handling ESD-sensitive components to prevent damage.
Guides on the proper electrical installation of the encoder, emphasizing ESD precautions.
Outlines risk minimization strategies using Safety Integrated, emphasizing manufacturer responsibilities.
Details the critical steps and checks required for safe and correct commissioning of the encoder.
Lists detailed technical data, including electrical, mechanical, and environmental specifications.
To Next Page