en PowerBoost function
14
vPowerBoost function
Power Boost f unct i on
The PowerBoost function enables you to heat up large
quantities of water faster than when using heat setting
Š.
This function can always be activated for a hotplate,
provided the other hotplate in the same group is not in
use (see illustration). Otherwise,
› and Š will flash in
the display for the selected hotplate; the
Š heat setting
will then be set automatically without activating the
function.
Activation
1. Select a hotplate.
2. Touch the & symbol.
› lights up on the display.
The function is activated.
Deactivation
1. Select the hotplate.
2. Touch the & symbol.
The › display goes out and the hotplate switches
back to the Š heat setting.
The function is deactivated.
Note: In certain circumstances, the PowerBoost
function can switch itself off automatically in order to
protect the electronic elements inside the hob.
AChildproof lock
Ch i l d p r o o f lock
You can use the childproof lock to prevent children
from switching on the hob.
Activating and deactivating the childproof
lock
The hob should be turned off.
To activate: press the symbol ‚ for approximately 4
seconds. The indicator next to the symbol ‚ lights up
for 10 seconds. The hob is locked.
To deactivate: press the symbol ‚ for approximately
4 seconds. The lock is now deactivated.
Childproof lock
With this function, the childproof lock automatically
activates when a hob is switched off.
Switching on and off
You can find out how to switch the automatic childproof
lock on in the ~ "Basic settings" section
To Next Page
Loading...
Need help?
General