Siemens EQ.500 classic - Changing the Basic Set- Tings

Basic settings en
23
Setting Selection Description
Water filter New filter
No filter
Set use of the water fil-
ter.
Coffee temp. normal
high
max.
Set the temperature for
coffee drinks.
Note:The setting is ef-
fective for all preparation
types.
Languages See options on the appli-
ance.
Set menu language.
Changes are immedi-
ately displayed.
Autom. switch-off See options on the appli-
ance.
Set how long the appli-
ance should wait after
preparing the last drink
before automatically
switching itself off.
Water hardness 1 (soft)
2 (medium)
3 (hard)
4 (very hard)
2
Water-softening system
Set the appliance to the
local water hardness.
→"Setting the water
hardness", Page15
Key tones Key tones on
2
Key tones off
Switch the button tones
on or off.
Factory settings Full reset?
Continue: OK
Cancel: ←
Restore settings to the
factory settings.
Note:All individual set-
tings will be deleted and
reset to the factory set-
tings.
1
Depending on the appliance specifications
2
Factory setting (may vary according to model)
11.2 Changing the basic set-
tings
1. Press
⁠.
2. Use or to select the de-
sired basic setting and press ⁠.
a The display will show the setting
options and the navigation sym-
bols will light up. The display indic-
ates the current setting.
3. Use
or to make the de-
sired selection and press ⁠.
a The setting is now saved.
4. Use
to go back.
5. Press to exit the menu.