en Basic settings
50
Basic setting Selection Description
WiFi connection On
Off
Switch off the wireless module with
prolonged absence or to save energy.
Note:In networked standby mode
your appliance requires max. 2W.
Remote start On
Off
Switch remote start on the appliance
on and off.
Note:With the "Home Connect" app
only switch-off is possible.
Add mobile
device
- Connect the appliance to the "Home
Connect" app or additional accounts.
Network informa-
tion
- Display network information and appli-
ance information.
Delete network
settings
- Note:You cannot operate your appli-
ance via the "Home Connect" app
without a network connection.
Software update - Note:This setting is only available
with a software update.
12.3 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the HomeConnect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡ The current software and hardware
version of your appliance.
¡ Status of any previous reset to
factory settings.
This initial registration prepares the
HomeConnect functions for use and
is only required when you want to
use the HomeConnect functions for
the first time.
Note:Please note that the
HomeConnect functions can only be
utilised with the HomeConnect app.
Information on data protection can be
retrieved in the HomeConnect app.
13 Basic settings
You can configure the basic settings
for your appliance to meet your
needs and call up additional func-
tions.
13.1 Changing the basic set-
tings
1. Press .
a The display shows the list of basic
settings.
2. Change the required basic setting.
a The appliance saves the basic set-
ting automatically.
3. To exit the basic settings, press
.