EasyManua.ls Logo

Siemens EQ500 classic TP51 Series - Troubleshooting; Appliance Not Responding or Dispensing Issues; Milk System and Froth Problems; No Milk Intake or Cold Froth

Siemens EQ500 classic TP51 Series
136 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting en
61
13 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
staff.
Only use genuine spare parts when repairing the appliance.
If the power cord of this appliance is damaged, it must be replaced by the
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Fault Cause and troubleshooting
Appliance no longer
responds.
Appliance has a fault.
1. Pull out the mains plug and wait 60seconds.
2. Re-insert the mains plug.
Appliance only dis-
penses water, not cof-
fee.
Empty bean container is not detected by the appli-
ance.
Pour in coffee beans.
Coffee shaft on brewing unit is blocked.
Clean the brewing unit.
Beans are too oily and are not falling into thegrinder.
Gently tap the bean container.
Change the coffee variety.
Do not use oily beans.
Clean the empty bean container with a damp cloth.
Brewing unit is not inserted properly.
Slide the brewing unit right back.
Appliance is not dis-
pensing milk froth.
Milk system is soiled.
Clean the milk system in the dishwasher.
Milk tube not immersed in milk.
Use more milk.
Check whether the milk tube is immersed in the
milk.
Heavy build-up of limescale in the appliance.
Descale the appliance.
No milk intake by the
milk system.
The milk system is assembled incorrectly.
Assemble the milk system correctly.

Table of Contents

Related product manuals