Siemens ET13051 - Electrical Plates with 7- and 10-Setting Adjuster

Electrical hot plates with 10-setting
knob
These hot plates are controlled by an energy control
knob with which you can choose the heat that is suitable
for the food you are cooking (figure 3).
By consulting the following table of cooking methods
and considering the amount of food being cooked, turn
the control knob to the correct setting for the dish you
want to cook. The “on” control indicator light will come
on. To switch off the hotplate, turn the control knob to
the setting 0. The control light will now go off.
Figure. 3
1
2
3
4
5
6
7
8
9
9
Electrical hot plates with 7-setting
knob
This hotplate is controlled by a knob with seven settings
(figure 4), which should be used as follows:
Setting 1 and 2: heating.
Setting 3 and 4: quick heating and cooking.
Setting 5 and 6: frying.
Figure. 4
1
2
3
4
5
6