Siemens Euroset 825 - Displaying call duration; Activating; deactivating call duration display

39
NEC, euroset 825 IM English: A30350-X102-X22-1-7619
22.1.97
825I-E2.FM
Displaying call duration
Your telephone can show the duration of the call in its display. When you receive
your telephone, call duration display is activated. If you want to deactivate it, proceed
as described below.
To change the settings, you must first enter the PIN.
c
Lift the handset.
Press the F key.
Choose "Call data" from the
menu.
Choose "Call duration off" or
or "Call duration on" from the
menu, and enter the PIN.
o
Once the last PIN digit is
entered, call duration display
is switched on or off, as the
case may be.
Example:
b
The duration of the call
appears automatically 12
seconds after the last digit
of the phone number is
dialed.
It is shown in the display
(minutes:seconds).
Note:
When the call is finished, its duration remains displayed for about 3 seconds.
Activating / deactivating call duration display
Phone book?
><
f
Phone book?
Phone menu:
Call data?
><
Call data?
Phone menu:
Call duration off?
■
Enter PIN:
Call duration on?
Entry stored!
Phone book?
02:38