Siemens Euroset 825 - Connecting the telephone

5
NEC, euroset 825 IM English: A30350-X102-X22-1-7619
22.1.97
825I-E2.FM
Putting into operations
A few simple steps are all that is required to make you telephone ready to use:
1. Spiral handset cord
Long straight end of the cord: Push the connector into the smaller a socket on
the underneath of the telephone (see diagram) until you hear it engage. Feed the
handset cord into the cable guide provided.
Attach the other end to the handset.
2. Connecting cord
Push the connector into the larger socket on the underneath of the telephone
(see diagram) until you hear it engage. Feed the cord into the cable guide.
Insert the other connector into your telephone wall socket.
Your euroset 825 is now ready for use.
Connecting the telephone