What to do if the displays flash on my Siemens EX LY?
If the displays on your Siemens Hob are flashing, it could mean that the control panel is wet or something is covering it. Try drying the control panel or removing the object.
Why no displays light up on my Siemens EX LY Hob?
If no displays light up on your Siemens Hob, start by checking if there's a power failure by using other electrical appliances. If there is no power failure, ensure the appliance is connected according to the circuit diagram. If issues persist, it could be an electronics fault, and you should contact technical after-sales service.
What to do if cooking zone overheats on my Siemens EX LY Hob?
If the cooking zone has overheated and switched off on your Siemens Hob to protect the work surface, allow the electronics to cool down before turning the cooking zone back on.
What to do if the cooking sensor overheats on my Siemens EX LY Hob?
If the cooking sensor on your Siemens Hob has overheated and switched off the cooking zone, wait until the cooking sensor has cooled down before reactivating the function.
What to do if the cooking sensor overheats and all cooking zones switch off on my Siemens EX LY?
If the cooking sensor on your Siemens Hob has overheated and switched off all the cooking zones, when you are not using the cooking sensor, remove it from the cookware and keep it away from other cooking zones or heat sources. Then, switch the cooking zones back on.
What to do if the wireless cooking sensor is not responding on my Siemens EX LY?
If the wireless cooking sensor of your Siemens Hob is not responding and the display isn't lighting up, first, replace the 3 V CR2032 battery. If that doesn't work, press and hold the symbol on the cooking sensor for 8–10 seconds, then reconnect the cooking sensor to the hob. If the problem continues, contact technical after-sales service.
What to do if the cooking zone operates continuously on my Siemens EX LY Hob?
If the cooking zone on your Siemens Hob has been operating continuously for an extended period, it means the individual safety switch-off is activated. To resolve this, touch any button to switch off the display, then you can reset the cooking zone.
What to do if hot cookware causes my Siemens EX LY to switch off?
If there is hot cookware near the control panel of your Siemens Hob and the cooking zone has been switched off to protect the electronics, remove the cookware. Wait a few seconds, then touch any button. Once the fault display disappears, you can continue cooking.
What to do if connection to the cooking sensor has been broken on my Siemens EX LY?
If the connection to the cooking sensor of your Siemens Hob has been broken, try switching the function off and then reactivating it.
What to do if Siemens EX LY Hob electronics overheat and switch off?
If your Siemens Hob's electronics have overheated, causing one or more cooking zones to switch off, wait for the electronics to cool down sufficiently. Then, touch any button on the control panel.
General| Type | Induction hob |
|---|---|
| Width | 60 cm |
| Number of Cooking Zones | 4 |
| Control Type | Touch control |
| Boost Function | Yes |
| Timer | Yes |
| Child Lock | Yes |
| Residual Heat Indicator | Yes |
| Child Safety Lock | Yes |
| Automatic Pan Detection | Yes |
| Power Consumption | 7.4 kW |
To Next Page
