Siemens EX875KYV1E - Page 17

Childproof lock en
17
17.2 Cancelling the meal assistant
1.
Select the cooking zone.
2.
Select the active cooking mode and switch to a dif-
ferent cooking mode.
a The function is switched off.
18 Childproof lock
The hob is equipped with a childproof lock. This pre-
vents children from switching on the hob.
18.1 Activating the childproof lock
Requirements
¡ The hob is switched on.
¡ All cooking zones are switched off.
1.
Open the docking menu.
2.
Touch
⁠.
a The hob is locked.
18.2 Switching off Childproof lock
▶
Follow the instructions in the display panel.
a The lock is released.
18.3 Automatic childproof lock
You can also activate the childproof lock automatically
every time the hob is switched off.
You can find out how to switch the function on and off
in the "Basic settings" section →Page17.
19 Wipe protection
You can use this function to lock the control panel for
cleaning so that you do not accidentally change the
settings.
The lock has no effect on the main switch.
19.1 Switching on Wipe protection
1.
Open the docking menu.
2.
Touch ⁠. A signal sounds.
a The control panel remains locked for 30seconds.
a After 30seconds, a signal tone sounds and the
control panel is unlocked.
19.2 Switching off Wipe protection
To cancel the function early, follow the instructions on
the display.
20 Individual safety switch-off
The safety function is switched on if one cooking zone
is in operation for an extended period and you do not
change any settings. A message appears on the dis-
play and the cooking zone stops heating.
To switch off the display and reset the cooking zone,
touch any button.
21 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
21.1 Overview of the basic settings
Setting Description and options
Language Change the display language for the
appliance.
Home Connect You can use this function to connect
the appliance to your home network
and a mobile device.
cookConnect
System
You can use this function to control
certain functions of the extractor
hood via the hob.
Signal tones You can use this function to select
warning tones that the appliance is
to output.
1
The function is not available in this model.
Setting Description and options
Duration of the
warning signal
You can use this function to change
the duration of the warning signal.
Signal tone
volume
You can use this function to change
the volume of the signal tones.
Button tones You can use this function to select
whether the appliance emits tones
when you touch the buttons on the
touch display.
Display bright-
ness
Change the brightness of the display.
flexInduction You can use this function to set the
switch-on mode for the function after
the hob has been switched on: Two
independent cooking zones or one
single zone.
1
The function is not available in this model.