Siemens Extractor hood - Filter Removal and Installation; Metal-Mesh Grease Filter Handling; Activated Carbon Filter Management

37
Removing and installing the grease filters

Activated carbon lters bind the odours in
circulating-air mode.
Installing and removing the activated
carbon lters
1. Remove the grease lters (see Removing
and installing the metal-mesh grease lters).
2. Insert the activated carbon lter.
3. Lock the catch.
4. Reinsert the grease lters (see Removing
and installing the metal-mesh grease lters).
Changing the activated carbon lter
 Under normal operation (daily 1 to 2 hours)
the activated carbon lters must be replaced
approximately 2x year.
 The activated carbon lter is available from
specialist outlets, customer service or the
Online Shop (see Optional accessories). Use
original lters only.
 Activated carbon lters do not contain any
pollutants. They can be disposed of in the
household refuse.

Before removing and installing the grease
lters, always follow the instructions and
warnings in the chapter entitled ”Safety
instructions”!
Removing and installing the metal-mesh
grease lters
1. Open the lock and fold down the grease
lters. In doing so, hold the underside of the
grease lters with your other hand.
(for appliances with edge extraction)
2. Clean the grease lters.
3. Reinsert the cleaned grease lters.