Siemens FDA221 - Accessories

6
Smart Infrastructure A6V10331032_k_en_--
2021-06-28
If the aspirating smoke detector is to be operated on the FDnet/C-NET, the communication
interface FDCC221S (S24218-A201-A2) must be ordered separately.
Accessories
Communication interfaceFDCC221S
● For connecting the aspirating smoke detector to FDnet/C-NET
● Integrated 'line separator' function
● Additional MC link interface (port for 3.5 mm jack)
● Tool-free mounting on a designated PCB slot
● Supplied with:
– 2xspacers with thread
– 4-pin plug-in terminal
– ID adhesive label
Power supply kitFP120-Z1
● Standalone power supply(70W)
● Supply to external devices and components as per EN54-4 and VdS
● With operating and fault indicator, shown via a green and a yellow LED
● With potential-free relay contacts for fault messages
● Additional installation of an I/O module possible
● Uninterruptible power supply with battery charging
● Batteries: max.17Ah
● Dimensions: (WxHxD) 430x399x124mm
BatteryFA2003-A1 (12V, 7Ah, VdS)
● For supplying fire control panels and aspirating smoke detectors with power
● Compatible with:
– Fire control panels for the 'Sinteso' and 'CerberusPRO' product lines
– External power units for the aspirating smoke detectors FDA241 and
FDA221