Siemens FDOOT241-8 - Flat Detector Base FDB202;222 Mounting

2BStructure and function
22BAccessories
3
47 |
138
Building Technologies
007004_t_en_--
Fire Safety
2015-11-04
3.7.4 Collective detector base, flat FDB202
● For the mounting of point detectors
● For the recess-mounted cable entry
● Directly attached to the mounting surface
● Collective
● Gray terminal block
● Compatible with:
● Order no.: S54319-F3-A1
See also
 Flat detector base FDB202/222 [➙ 74]
3.7.5 Sealing element FDBZ295
● To protect an alarm sounder or point detector against dirt
and splash water
● Cannot be used in conjunction with designation plate
FDBZ291
● A detector base FDB2x1 or FDB2x1-AA must be used in
addition to the alarm sounder or point detector
● Compatible with:
● Order no.: S54319-F10-A1
See also
 Sealing element FDBZ295 [➙ 78]
3.7.6 Addressed sounder base FDSB291
● For acoustic alarming in the case of an event
● For the FDnet detector line
● Orange terminal block
● With two micro terminals
● For the recess-mounted cable entry
● For surface-mounted cable entry, up to 6 mm cable
diameter
● Compatible with:
● Not compatible with:
● You will find more information in document 007025
● Order no.: A5Q00001647
See also
 Applicable documents [➙ 9]