AS200-AS200A-AS300 / IRL / A31008-M2208-V101-1-7619 / starting.fm / 02.11.2010
4
Connecting the charging cradle (if included)
Setting up the handset for use
The display is protected by a plastic film.
Please remove the protective film!
Inserting the batteries and closing the battery cover
¤ Connect the flat plug from the power supply 1.
¤ Plug the mains adapter into the plug socket 2.
If you need to disconnect the plug from the charging cradle,
press the release button 1 and disconnect the plug 2.
1
2
1
2
Warning
Use only the rechargeable batteries (¢ page 13) recommended by Gigaset
Communications GmbH. Never use conventional (non-rechargeable) batteries, as this
could result in significant health risks and damage to property. For example, the outer cas
-
ing of the batteries could be destroyed or the batteries could explode. The phone could
also malfunction or be damaged as a result of using batteries that are not of the recom
-
mended type.
¤ Insert the batteries the right way
round.
The polarity is indicated in/on
the battery compartment.
¤ Slide the battery cover back into the
main casing until it clicks into place.
If you need to open the battery cover, for
instance to replace the batteries, place
your fingertip in the grooved area on the
top of the cover and slide down.
+
–
To Next Page
Loading...
