Siemens Gigaset C300 - Using Multiple Handsets; Handset Management and Internal Calls; Call Transfer and Consultation Procedures

40
Using multiple handsets
Gigaset C300 / GRC EN / A31008-M2203-T101-1-8U19 / registr_sett.fm / 10.06.2010
Version 4, 16.09.2005
Registering other handsets
You can manually register other Gigaset
handsets and handsets for other devices
with GAP functionality as follows.
De-registering handsets
You can de-register all other registered
handsets from each of the registered
Gigaset handsets.
§Menu§ ¤ Settings ¤ Registration
¤ De-register Handset
s Select the internal subscriber
you wish to de-register and
press
§OK§.
(The handset you are currently
using is highlighted with <).
~ Enter the current system PIN
and press
§OK§.
§Yes§ Press the display key.
Locating a handset (paging)
You can locate your handset using the base.
¤ Briefly press the registration/paging key
on the base (¢ page 2).
¤ All handsets will ring simultaneously
(paging), even if the ringtones are deacti-
vated.
Ending paging
¤ Briefly press the registration/paging key
on the base or press the talk key c on
the handset.
Changing the base
If your handset is registered to more than
one base, you can set it to a particular base
or to the base that has the best reception
(Best Base).
§Menu§ ¤ Settings ¤ Registration
¤ Select Base
s Select one of the bases or Best
Base and press
§OK§.
Making internal calls
Internal calls are free calls between handsets
that are registered with the same base.
Calling a specific handset
u Initiate internal call.
~ Enter the number of the hand-
set.
Or:
s Select handset.
c Press the talk key.
Calling all handsets (group call)
u Press and hold.
Or:
u Initiate internal call.
* Press the star key.
Or
Call All Select
c Press the talk key.
All handsets are called.
Ending a call
a Press the end call key.
Transferring a call to another
handset/making an internal
consultation call
You are talking to an external participant
and can call an internal participant at the
same time to forward the call or to consult.
u Open the list of handsets.
1) On the handset
¤ Start to register the handset as
described in its user guide.
2) On the base
¤ Press and hold the registration/paging
key on the base (¢ page 2) (approx. 3
sec.).