46
Base station settings
Gigaset C300 / GRC EN / A31008-M2203-T101-1-8U19 / registr_sett.fm / 10.06.2010
Version 4, 16.09.2005
Resetting the system PIN
If you have forgotten your system PIN, you
can reset the base to the original code 0000:
Disconnect the power cable from the base.
Hold down the registration/paging key on
the base while reconnecting the power
cable to the base. Hold down the key for at
least 5 seconds.
The base has now been reset and the system
PIN set to 0000.
Resetting the base to the
default settings
When the settings are restored:
u Date and time are retained
u Handsets are still registered
u Eco Mode is activated and Eco Mode+ is
deactivated
u The system PIN is not reset
§Menu§ ¤ Settings ¤ System ¤ Base Reset
§Yes§ Press the display key.
Please note
All handsets are de-registered and must
be re-registered. All settings are reset to
the default settings.
To Next Page
Loading...
