Communications
Confidential 17 COM MD CC GRM T
J. Junggebauer
Version 1.0 July 2005
6.3 Assembling of handset
The assembling procedure of the C35 handset is the same as the one of the C34
handset.
Insert keypad and earphone and afterwards PCB in upper case shell.
Close handset with lower case shell by pressing both case shells together.
Pay attention on the battery contact springs on board.
Make an optical inspection of the battery contact springs afterwards.
Put in batteries and check spring tension.
Switch the handset on to check correct function of battery contact springs.
6.4 Exploded view of handset
To Next Page
Loading...
