EasyManua.ls Logo

Siemens Gigaset C380 - Using the Network Mailbox; Configuring Fast Access for Network Mailbox; Calling the Network Mailbox

Siemens Gigaset C380
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41
ECO DECT
Gigaset C380-C385 / IM English / A31008-M2007-R101-2-3T19 / registr_sett.fm / 09.11.2010
Version 4, 16.09.2005
ECO DECT
You are helping to protect the environment
with your Gigaset.
Reduced energy consumption
Your telephone has an energy-saving
adapter plug and uses less energy.
Reduced transmission power
The transmission power of your telephone is
reduced automatically:
u Handset: The closer the handset is to the
base, the lower the radiation.
u Base station: The radiation is reduced to
virtually zero when only one handset is
registered and the handset is placed in
the base.
You can reduce the transmission power of
the handset and base station even further by
using Eco Mode.
u Eco Mode
Reduces the radiation of the base station
and handset by 80% - whether you are
making a call or not. Eco Mode reduces
the range of the base station by approx.
50%. Using Eco Mode always makes
sense when a reduced range is sufficient
Switching off radiation
u Eco Mode+
When you activate Eco Mode+, radiation
(DECT transmission power) from the base
and handset is switched off in the idle
state.
This is also true when multiple handsets
are used, provided the handsets support
Eco Mode+.
Activate/deactivate Eco Mode /
Eco Mode+:
§Menu§ ¤ Settings ¤ Base ¤ Additional
Features ¤ Eco Mode / Eco Mode+
§OK§ Press the display key ( = on).
Status displays
Display icon
ÐiÑÒ
|(flashes)
Reception strength:
– good to low
– no reception
¼ Eco Mode+ enabled
(displayed instead of the
reception strength icon
when in idle status)
Icon green Eco Mode enabled
Please
u With Eco Mode+ enabled, press and
hold the talk key c to check base
station reachability. You will hear the
dial tone if the base station is reacha-
ble.
u When Eco Mode+ is enabled:
call setup will be delayed by
approx. 2 seconds.
handset standby time will be
reduced by approx. 50%.
u Registering handsets that do not sup-
port Eco Mode+ will cause the mode
to be deactivated on the base station
and all other handsets.
u Activating Eco Mode reduces the
range of the base station.
u Eco Mode / Eco Mode+ and repeater
support (¢ page 47) cancel each
other out, i.e. you cannot use Eco
Mode and Eco Mode+ when using a
repeater.

Table of Contents

Related product manuals