Siemens Gigaset C380 - Changing Date and Time Settings; Changing the Display Language

47
Base station settings
Gigaset C380-C385 / IM English / A31008-M2007-R101-2-3T19 / registr_sett.fm / 09.11.2010
Version 4, 16.09.2005
Restoring the handset to the
factory settings
You can reset any individual settings and
changes that you have made. This will not
affect entries in the directory, calls list or SMS
lists, or the handset's registration to the base
station.
§Menu§ ¤ Settings ¤ Handset
¤ Reset Handset
Confirm query with
§OK§ or reject it with .
a Press and hold (idle status).
Base station settings
The base station settings are carried out
using a registered Gigaset C38H handset.
Protecting against
unauthorised access
Protect the system settings of the base sta-
tion with a PIN known only to yourself. You
may have to enter the system PIN into the
base station when manually registering a
handset.
Changing the system PIN
You can change the base station's 4-digit
default system PIN ("0000") to a 4-digit PIN
known only to yourself.
§Menu§ ¤ Settings ¤ Base ¤ System PIN
~ Enter the old system PIN and
press
§OK§. For security, the PIN is
shown as four stars (
****
).
~ Enter your new system PIN and
press
§OK§.
a Press and hold (idle status).
Resetting the system PIN
If you have forgotten the system PIN, you
can reset it to the original code 0000 by
resetting the base station to its default set-
tings. This will also reset every other set-
ting, see "Restoring the base station to the
factory settings" ¢ page 48.
Changing ringer tones
u Volume:
You can choose between five volumes
and the "crescendo" ring, ¢ page 45.
Select "0" to deactivate the base station
ringer.
u Ringer tones:
You can set a ringer melody for external
calls, ¢ page 45.
§Menu§ ¤ Settings ¤ Base ¤ Audio Settings
¤ Ringer Volume / Ringer Melody
For how to adjust the settings, ¢ page 45.
Repeater support
With a repeater you can increase the range
and reception strength of your base station.
You will need to activate repeater mode. This
will terminate any calls that are in progress at
the time.
Precondition: A repeater is registered. The
Eco Mode / Eco Mode+ mode is deacti-
vated.
§Menu§ ¤ Settings ¤ Base
¤ Additional Features ¤ Repeater Mode
§Yes§ Press the display key.
When repeater mode is active, the menu
item is marked with .
Ç
Please
Repeater support and Eco Mode / Eco
Mode+ (¢ page 41) cancel each other
out, i.e. both functions cannot be used at
the same time.
‰