122
Operating the base station on the PABX
Changing the dialling mode
Gigaset C470-C475 IP / GBR / A31008-M1916-L101-1-7619 / settings_bs_hs_pabx.fm / 7.2.08
Version 2.1, 08.01.2007
Operating the base station on the PABX
The following settings are only necessary when your PABX requires them; see the PABX
user guide. The settings only concern fixed line network connections.
You cannot send or receive SMS messages on PABXs that do not support Calling Line Iden-
tification.
Changing the dialling mode
You can set the dialling mode.
v ¢ Ð Settings ¢ Telephony ¢ Fixed Line ¢ Dialling Mode
Tone / Pulse / Tone-Earth
Select and press
§OK§ (=on).
a Press and hold (idle status).
Setting recall
You can set the recall option.
v ¢ Ð Settings ¢ Telephony ¢ Fixed Line ¢ Recall
q Select recall and press §OK§.
The current setting is indicated by .
a Press and hold (idle status).
Setting pauses
Changing pause after line seizure
You can set the length of the pause inserted between pressing the talk key c and sending
the phone number.
v55O L
~ Enter a number for the length of the pause (1 = 1 sec.; 2 =3sec.; 3 =7sec.)
and press
§OK§.
Please note:
– Suffix dialling (for selecting the connection) is not possible in conjunction with pulse dialling:
a hash "#" is displayed during dialling but ignored when pulse dialling is used.
– Enter an asterisk "*" to switch temporarily to tone dialling. The asterisk is not displayed.
‰
‰
To Next Page
Loading...
Need help?
General
