146
Web configurator – configuring the telephone via a PC
Call Forwarding to activate VoIP connections
Gigaset C470-C475 IP / GBR / A31008-M1916-L101-1-7619 / web_server.fm / 7.2.08
Version 2.1, 08.01.2007
Call Forwarding to activate VoIP connections
You can forward calls to your VoIP numbers and to your Gigaset.net number.
You can forward calls to your VoIP numbers to any external number (VoIP, fixed line net-
work or mobile network number). The forwarding is done via a VoIP connection.
You can forward calls to your Gigaset.net number within the Gigaset.net, i.e. to another
Gigaset.net number.
You can define if and when calls to your Gigaset.net number and some of your VoIP num-
bers (VoIP account) should be forwarded to this VoIP number.
You can also use the handset to define call forwarding and activate/deactivate it, see
page 47.
¤ Open the following Web page: Settings ¢ Telephony ¢ Call Forwarding.
The display shows a list of all your VoIP connections and your Gigaset.net number.
Connections
Select the name you have assigned to the VoIP number, or select Gigaset.net.
When
Select when a call to this VoIP number should be forwarded: When busy / No reply / Always.
Select Off to deactivate call forwarding.
Call number
Enter the phone number to which the calls should be forwarded. Please note that you
may have to enter the area code when forwarding to a fixed line network number in the
same area (depending on your VoIP provider and the setting for the automatic area
code, see page 148).
The settings only affect the selected phone number.
Setting DTMF signalling for VoIP
DTMF signalling is required, for example, for querying and controlling certain network
mailboxes via digit codes or for remote operation of the integrated answer machine
(Gigaset C475 IP).
To send DTMF signals via VoIP you must first define how key codes should be converted
into and sent as DTMF signals: as audible information via the speech channel or as "SIP Info"
message.
Ask your VoIP provider which type of DTMF transmission it supports.
¤ Open the following Web page: Settings ¢ Telephony ¢ Advanced Settings.
In the DTMF over VoIP connections area, make the required settings for sending DTMF signals.
¤ Activate Audio or RFC 2833, if DTMF signals are to be transmitted acoustically (in voice
packets).
¤ Activate SIP Info if DTMF signals are to be transmitted as code.
¤ Now click Set to save your settings.
Please note:
For how to forward your fixed line network number, see page 45.
To Next Page
Loading...
