153
Web configurator – configuring the telephone via a PC
Saving messenger access data
Gigaset C470-C475 IP / GBR / A31008-M1916-L101-1-7619 / web_server.fm / 7.2.08
Version 2.1, 08.01.2007
¤ In the Messenger Account field, select whether you wish to use the Gigaset.net Jabber
server or another provider's messenger server (Other).
The access data for Gigaset.net is already stored in the base station. It is displayed in Jab-
ber ID, Authentication password and Jabber server. With this data you can also register with
the Gigaset.net Jabber server through your PC.
¤ Enter the user ID (max. 50 characters) and password (max. 20 characters) that you used
to register with the messenger server in the Jabber ID and Authentication password fields.
If you have selected Messenger Account = Gigaset.net, the fields are preconfigured with
your Gigaset.net account.
¤ In the Jabber server field, enter the IP address or the DNS name of the messenger server
with which you are registered for instant messaging.
Max. 74 alphanumeric characters.
If you have selected Messenger Account = Gigaset.net, the field is preconfigured with the
name of the Gigaset.net server.
¤ Enter the number of the communication port on the Jabber server in the Jabber server
port field. The default port is 5222.
If you have selected Messenger Account = Gigaset.net, the port number is preconfigured.
¤ Enter a resource name (max. 20 characters) in the Resource field.
The default is: phone.
¤ Enter the priority for your phone in the Priority field. Select a number between -128
(highest priority) and 127 (lowest priority) for the priority.
The default is: 5
¤ Click Set.
Setting up Gigaset.net Jabber account
Your phone is already registered with the Gigaset.net Jabber server. An account has been
assigned to your phone.
In order to chat with other Gigaset.net subscribers via this account, you must transfer the
required Gigaset.net subscribers to a contact list (buddy list) on your PC. You can use any
conventional Jabber client for this (e.g. PSI, Miranda; see e.g. http://www.swissjabber.ch
).
In order to use the Gigaset.net Jabber account, proceed as follows:
¤ Start the Web configurator, open the Settings ¢ Messaging ¢ Messenger Web page and
select the Messenger Account Gigaset.net field. Your account data is displayed in Jabber ID
and Authentication password. You will need these to create a buddy list via the Jabber cli-
ent on the PC.
¤ Start your Jabber client on the PC.
¤ Enter your Gigaset.net Jabber ID on the Jabber client as a new account. The Jabber ID con-
sists of your Gigaset.net number and "@jabber.gigaset.net"
Example: 12345678901#9@jabber.gigaset.net
¤ Then enter your Authentication password.
Please note:
–Do not select the option "Create new account". Your Gigaset.net Jabber account has already been
created in Gigaset.net.
– The option "SSL connection" must be deactivated in the Jabber client.
To Next Page
Loading...
