36
Using the directory and lists
Gigaset C590/C595 / IM EN / A31008-M2101-R101-1-UZ19 / direct_charges.fm / 04.06.2009
Version 4, 16.09.2005
Press the talk key c to return the calls
selected.
Select the
§View§ display key to access addi-
tional information, including for example
the number linked to the name. If you
have CNIP, then the name and town that is
registered with your network provider for
the calling number will be displayed. If the
name and town are not shown, it means
that the caller has not requested Calling
Line Identification or that Calling Line
Identification has been withheld.
Select the
§Options§ display key to select the
following options:
Copy to Directory
Copying a displayed number to the
directory.
Delete Entry
Delete selected entry.
Delete All
Delete all entries.
When you quit the call lists, all entries are
set to the status "old", i.e. the next time
you open the call the list they will no
longer be shown in bold.
Opening lists with the message
key
You can use the message key f to open
the following list selection:
u Answering machine list (Gigaset C595
only) or network mailbox, if your net-
work provider supports this function
and a shortcut is set for the network
mailbox (
¢ page 54).
u Incoming message list (¢ page 41)
If several mailboxes are set up
(
¢ page 44), several lists are dis-
played.
u List of missed calls
u List of missed appointments
(
¢ page 37)
An advisory tone sounds as soon as a new
message arrives in a list. The f key
flashes (it goes off when the key is
pressed). In idle status, the display shows
an icon for the new message:
The number of new entries is displayed
under the corresponding icon.
Icon New message...
Ã
... in the answering machine list
(Gigaset C595 only) or on the
network mailbox
™
... in list of missed calls
Ë
... in the SMS list
... in the Missed Alarms list:
To Next Page
Loading...
