Siemens Gigaset C595 - Changing the Speaker;Earpiece Volume; Changing Ringtones; Setting Volume;Melody; Switching On;Off Ringtone for Anonymous Calls

64
Handset settings
Gigaset C590/C595 / IM EN / A31008-M2101-R101-1-UZ19 / registr_sett.fm / 04.06.2009
Version 4, 16.09.2005
Changing the speaker/earpiece
volume
You can set the loudspeaker volume for
handsfree talking and the earpiece vol-
ume to five different levels.
In idle status:
t Call up the Handset Volume
menu.
r Set the earpiece volume.
s Scroll to the Speaker: line.
r Set the speaker volume.
§Save§ Press the display key if neces-
sary to save the setting perma-
nently.
Setting the volume during a call:
t Press the control key.
r Select volume.
The setting will automatically be saved
after approximately 3 seconds, if not then
press the display key
§Save§.
If t is assigned to another function:
§Options§ Open menu.
Volume Select and press §OK§.
Configure setting (see above).
Changing ringtones
u Volume:
You can choose between five volumes
(1–5; e.g. volume 3 = Š) and the
"crescendo" ringtone (6; volume
increases with each ring = ‡).
u Ringtones:
You can select a ringtone from a list of
pre-loaded ringtones.
You can set different ringtones for the fol-
lowing functions:
u Int. Calls
u Extern. Calls
Setting volume/melody
In idle status:
v ¢
Ï
¢ Audio Settings
¢ Ringtones(Handset)
¢ Volume / Melodies
r Set volume/melody for inter-
nal calls and anniversaries.
s Scroll to the next line.
r Set volume/melody for exter-
nal calls.
§Save§ Press the display key to save
the setting.
Switching on/off the ringtone for
anonymous calls
You can set your telephone not to ring if a
caller withholds their number. The call will
only be signalled in the display.
In idle status:
v
¢
Ï
¢ Audio Settings
¢ Ringtones(Handset)
¢ Anon. Calls Silent
Press §Change§ to activate/deactivate the
function (³= on).
Please note
You can also set the call volume using
the menu (
¢ page 27).