74
Appendix
Gigaset C590/C595 / IM EN / A31008-M2101-R101-1-UZ19 / appendix.fm / 04.06.2009
Version 4, 16.09.2005
Handset operating times/charging
times
The operating time of your Gigaset
depends on the capacity and age of the
batteries and the way they are used. (All
times are maximum possible times).
Due to the constant progression in battery
development, the list of recommended
batteries in the FAQ section of the Gigaset
Customer Care pages is regularly updated:
www.gigaset.com/customercare
Base power consumption
In standby mode:
Gigaset C590: approx. 1,1 watt
Gigaset C595: approx. 1,2 watt
During the call:
Gigaset C590: approx. 1,0 watt
Gigaset C595: approx. 1,1 watt
General specifications
Pin connections on the telephone jack
Capacity (mAh) approx.
550 700 800 1000
Standby time
(hours)*
160/
48
185/
56
210/
64
260/
79
Talktime (hours)10121317
Operating time for
1.5 hrs of calls per
day (hours)**
85 100 115 140
Charging time in
base (hours)
7,5 8,5 10 12
Charging time in
charging cradle
(hours)
6,5 7,5 8,5 10,5
* with/without display backlight
** without display backlight
(Setting the display backlight
¢ page 70)
DECT standard is supported
GAP standard is supported
No. of channels 60 duplex channels
Radio frequency range 1880–1900 MHz
Duplex method Time multiplex,
10 ms frame length
Channel grid 1728 kHz
Bit rate 1152 kbit/s
Modulation GFSK
Language code 32 kbit/s
Transmission power 10 mW, average power
per channel
Range up to 300 m outdoors,
up to 50 m indoors
Base power supply 230 V ~/50 Hz
Environmental condi-
tions in operation
+5°C to +45°C, 20% to
75% relative humidity
Dialling mode DTMF (tone dialling)/
DP (dial pulsing)
1unused
2unused
3a
4b
5unused
6unused
To Next Page
Loading...
