Siemens Gigaset C59H - Registering the Handset; Register Handset; Select Base

11
First steps
Gigaset C59H / IM5 EN / A31008-M2150-S301-2-9U19 / starting.fm / 17.05.2010
Version 4, 16.09.2005
Registering the handset
A Gigaset C59H handset can be registered on up to four bases. You must initiate
handset registration on the handset and on the base.
When the registration process has completed successfully, the handset returns to
idle status. The handset's internal number is shown in the display e.g., INT 1. If not,
repeat the procedure.
On the handset
On the base
Within 60 sec. press and hold the registration/paging key on the base (approx. 3
sec.).
¤ Press the key below §Register§ on the
display screen.
A message displays that a search for a
base that is ready for registration is
being carried out.
Register
Please note
If the handset is already registered to at least one base, start the registration
process as follows:
v
¢
Ï
¢ Registration ¢Register Handset
If the handset is already registered to four bases, select the required base.
Please note
For instructions on deregistering the handsets, please consult the base
user guide.