Siemens Gigaset C59H - Setting the Date and Time

13
First steps
Gigaset C59H / IM5 EN / A31008-M2150-S301-2-9U19 / starting.fm / 17.05.2010
Version 4, 16.09.2005
Setting the date and time
Set the date and time so that the correct date and time can be assigned to incoming
calls, and so that the alarm can be used.
Date/Time
Date:
14.10.2009
Time:
00:00
Back Save
¤ Press the key below §Time§ on the screen
display to open the input field.
(If you have already set the time and
date, open the input field via the menu
¢ page 24.)
The Date/Time submenu is shown on the
display.
¤ The active input position flashes.
Enter day, month and year as an
8-digit number via the keypad,
e.g., 4Q2QQ
O for 14/10/2009.
Date/Time
Date:
31.01.2009
Time:
00:00
Back Save
Calls Time
Press the right or left control key
to change the input position and
correct an entry.
¤ Enter the hours and minutes in 4-digit
format via the keypad,
e.g., QM5for 07:15 am.
Change the input position with
the control key if necessary.
¤ Press down on the control key to switch to the
Time input field.