What to do if my Siemens IP Phone doesn't react to key presses?
If your Siemens IP Phone isn't reacting to key presses, it could be because the keypad lock is activated, or a key is stuck. Press the hash key until you receive confirmation. If that doesn't work, release the key.
How to fix Siemens Handsets with no display?
If your Siemens handset has no display, it may not be switched on, or the batteries may be empty. Press the On-hook key until confirmation is received. Charge or replace the batteries.
Why Siemens Handsets says 'Connect. No dial tone available'?
If your Siemens handset displays 'Connect. No dial tone available,' it means the communication system is currently in use by other users. Please try your call again later.
Why does my Siemens Gigaset M2 Professional Telephone say 'not available' after dialing?
If your Siemens Telephone displays 'not available' after dialing, it means the phone number was not fully entered, or the star or hash key was not pressed. Ensure you enter the phone number correctly or as prescribed.
What to do if my Siemens IP Phone displays 'Base 1 Outgoing and incoming calls and activation/deactivation are not possible'?
If you see the following on your Siemens IP Phone: 'Base 1 Outgoing and incoming calls and activation/deactivation are not possible', it means that the handset is locked. Remove the batteries from the handset and then re-insert them, proceeding as you would when loading batteries for the first time.
What to do if my Siemens IP Phone shows 'Base 1 Outgoing and incoming calls and activation/deactivation are not possible'?
If your Siemens IP Phone shows 'Base 1 Outgoing and incoming calls and activation/deactivation are not possible,' it means that the handset is blocked. To fix this, remove the battery pack from the handset and then re-insert it. Then, proceed as if you were loading batteries for the first time.
Why does my Siemens Gigaset M2 Professional Telephone say 'Connect. No dial tone available'?
If your Siemens Telephone displays 'Connect. No dial tone available' immediately after pressing the Talk key, it means calls cannot be made because the communication system is currently in use by other users. Please try your call again later.
What to do if my Siemens Telephone shows 'Time exceeded'?
If your Siemens Telephone displays 'Time exceeded', it means the maximum input time was exceeded because the On-hook key was not pressed, and there were long pauses between keystrokes. To resolve this, avoid long pauses when entering information and press the On-hook key.
What to do if my Siemens Telephone says 'Re-enter code:'?
If your Siemens Telephone displays 'Re-enter code:', it means the communication system is overloaded. Please wait and try again later.
What does it mean if my Siemens Gigaset M2 Professional says 'Not available'?
If your Siemens Telephone displays 'Not available', it indicates that the function you are trying to use is currently unavailable. Wait and try again later, or ensure you have entered the phone number correctly. You may also need to call the attendant console.
General| Number of Lines | 1 |
|---|---|
| Battery Life (Standby Time) | Up to 200 hours |
| Range (Indoors) | Up to 50 meters |
| Range (Outdoors) | Up to 300 meters |
| Hands-free | Yes |
| Caller ID | Yes |
| Phonebook Capacity | Up to 200 entries |
| Speakerphone | Yes |
| Number of Handsets | 1 |
| Answering Machine | No |
| Conference Call | Yes |
| Intercom | Yes |
| Headset Jack | Yes |
| Battery Type | NiMH |
| Weight | 130 g (handset) |
| Type | DECT Cordless Phone |
To Next Page