EasyManua.ls Logo

Siemens Gigaset S670 - Listening in to an External Call

Siemens Gigaset S670
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
44
Using several handsets
Gigaset S670/S675 / IM-MEA En / A31008-M1904-A601-1-3T19 / registr_sett.fm / 13.8.07
Version 4, 16.09.2005
Then, if the internal participant does not
answer or the line is busy, the call will
automatically return to you (the display
will show Recall).
Internal consultation calls
When you are speaking to an external
participant you can call an internal partic-
ipant at the same time for consultation.
u Open list of handsets.
The external participant hears
hold music if activated (see
page 55).
s Select handset and press
§OK§.
Ending a consultation call
§End§ Press the display key.
You are reconnected with the external
participant.
Accepting/rejecting call waiting
If you receive an external call during an
internal call, you will hear the call waiting
tone (short tone). The caller's number
or name will appear in the display if
Calling Line Identification is enabled.
Ending an internal call, accepting an
external call
§Accept§ Press the display key.
The internal call is ended. You are con-
nected to the external caller.
Rejecting the external call
§Reject§ Press the display key.
The call waiting tone is turned off.
You remain connected with the internal
participant. The ringer tone can still be
heard on other registered handsets.
Listening in to an external call
Precondition: The Listening In function
must be activated.
You are conducting an external call.
An internal participant can listen in on
this call and take part in the conversation.
All the participants are made aware of the
"listening in" by a signal tone.
Activating/deactivating internal
listening-in
v ¢ Ð ¢ Base ¢ Add. Features
¢ Listening In
Press §OK§ to activate/deactivate the func-
tion ( = on).
a Press and hold (idle status).
Internal listening in
The line is engaged with an external call.
Your screen will display information to
that effect. You want to listen in to the
external call.
c Press and hold the talk key.
You are linked into the call. All participants
hear a signal tone. During this time, this
handset displays the Conference message
and it is not possible to dial another
number from this handset.
Ending listening in
a Press the end call key.
All participants hear a signal tone.
If the first internal participant presses the
end call key a, the handset that has
"listened in" remains connected to the
external participant.

Table of Contents

Related product manuals