Information and Communication Mobile
Confidential 14 ICM MP CCQ GRM C
J. Junggebauer
Version 1.1 October 2003
7 Repair of SL1 handset
Do the repair of the phone in a clean environment. Use gloves for assembling and
ionized air to remove the dust from the display area of the handset and in general.
Consider the international ESD regulations.
7.1 Special equipment and tools
Torque driver with torx 5+ bit
7.2 Disassembling SL1 handset
Unscrew all 4 screws.
Insert the screwdriver in the belt clip hole and press in order to open the latch.
To Next Page
Loading...
