Information and Communication Mobile
Confidential 19 ICM MP CCQ GRM C
J. Junggebauer
Version 1.1 October 2003
Use the exploded view as a help to see how and where the components are located.
Insert microphone, speaker and afterwards PCB with keypad in upper case shell.
Insert loudspeaker and vibra and close handset with lower case shell by pressing
both case shells together. Fix the 4 screws with 15 Ncm using a torque driver torx 5+.
Switch the handset on to check correct function.
7.4 Exploded view SL1 handset
Receive
Microphone
Vibra
Loudspeaker
Screws
To Next Page
Loading...
