Information and Communication Mobile
Confidential 8 ICM MP CCQ GRM C
J. Junggebauer
Version 1.1 October 2003
5 Test and identification of faulty component
There are different faults that could appear.
Not all incoming components or systems have to be faulty.
The customer could have problems with the operation of the phone or
could have placed it close to a device (PC...) that affects it.
It could also happen, that there is a loose connection in the phone
(due to a cold soldering joint or something else).
So the fault might not appear during test.
There are different possibilities to test a phone depending on the information
you received with it.
To Next Page
Loading...
