Siemens Gigaset SL150 colour - Logo Display; Activating;Deactivating Auto Answer; Adjusting the Loudspeaker Volume

76
Handset settings
Gigaset SL100/SL150 colour / IM_en / A31008-M1572-R121-2-7619 / settings_bs_hs.fm / 28.10.05
Logo display
You can display a logo instead of the 'idle status display'. You have a choice of 3 logos.
v ¢ ì
Activating/deactivating Auto Answer
If you have activated this function, when you get a call you can simply lift the handset
out of its charger without having to press the talk key c (factory setting: On).
v ¢ ì
Adjusting the loudspeaker volume
You can adjust the handsfree volume on five levels and the earpiece volume on three
levels – you can even do this while an external call is in progress.
v ¢ ê
... then
a
Long press (back to idle status).
Display
Confirm.
Screen Picture
Confirm.
r
Screen picture on/off
sr
Go to the Picture: line and select a picture.
Show
Preview picture and accept.
[RRRRRRRRRRRRRRRRRRRRRR]
Save
Press the display key to save your settings.
a
Long press (back to idle status).
OK
OK
OK
Auto Answer
Confirm to deactivate or activate the function
(‰ =On).
a
Long press (back to idle status).
OK
Handset Volume
Confirm. You will hear the current handsfree speak-
ing volume.
r
Set the required level (1–5) in the entry field.
sr
Scroll one line down and set the handset volume
(1–3).
[RRRRRRRRRRRRRRRRRRRRR]
Save
Now press the display key to confirm the setting.
a
Long press (back to idle status).
OK