84
Setting the base station
Gigaset SL100/SL150 colour / IM_en / A31008-M1572-R121-2-7619 / settings_bs_hs.fm / 28.10.05
Repeater support
With a repeater you can increase the range and reception strength of your base station;
the repeater has to be registered. To use the repeater you first have to activate the
repeater mode. This will cancel any calls that are in progress.
v ¢ í ¢ Add. Features
Restoring the base station to factory settings
Resetting does not affect the system PIN and handsets are still registered.
v ¢ í ¢ Base Reset
Factory settings of the base station
s Repeater Mode
Select the menu item and confirm.
[RRRRRRRRRRRRRRRRRRRRR]
Yes
Press the display key to confirm the prompt.
OK
~ Enter the system PIN (factory setting: 0000) and con-
firm.
[RRRRRRRRRRRRRRRRRRRRR]
Yes
Press the display key to confirm the prompt.
OK
Name of the handsets "INT 1" to "INT 6" page 68
Internal listening in deactivated page 70
Network provider preselection preset according to country page 35
Send centre empty page 35
SMS incoming and draft messages list empty page 44
and
page 36
SMS message/message number. deactivated/deleted page 50/
page 50
List type missed calls page 33
Access code none page 85
pause after access code 3 s page 86
Pause after recall key 800 ms page 86
Pause after line seizure 3 s page 86
Recall 250 ms page 85
Dialling mode DTMF page 85
Answering machine functions (only S 150):
Answering machine activated page 54
Messages on the answering machine deleted page 31
Number of mailboxes one page 54
Announcement pre-recorded announcement page 56
Personal announcement/Announce only deleted page 55
Recording time/quality 120 s/standard page 63
Ring delay after 20 s page 63
Call screening deactivated page 64
To Next Page
Loading...
