12
First steps
Gigaset SL785 / USA en / A31008-M2009-R301-4-6019 / starting.fm / 14.02.2011
Version 4, 16.09.2005
To connect the USB cable or change the battery open the battery cover:
¤ Remove the belt clip (if
attached).
¤ Place a coin into the notch at
the bottom of the casing and
pull the battery cover
upwards.
To change the battery, place a
coin in the cavity in the casing
and pull the battery upwards.
Attaching/removing the belt clip
The handset has notches on each side to attach the belt clip.
¤ To attach – Press the belt clip
onto the back of the handset so
that the protrusions on the belt
clip engage the notches.
¤ To remove – Using your right
thumb, apply pressure to the cen-
ter right of the belt clip, push the
fingernail of your left index finger
between the clip and the casing,
and lift the clip upwards.
To Next Page
Loading...
