Siemens Gigaset SL785 - Setting the date and time

14
First steps
Gigaset SL785 / USA en / A31008-M2009-R301-4-6019 / starting.fm / 14.02.2011
Version 4, 16.09.2005
Setting the date and time
Set the date and time so that the alarm and the calendar can be used.
Date/Time
Date:
10/14/2009
Time:
00:00am
am/pm Save
¤ Press the key below §Time§ on the dis-
play screen to open the input field.
(If you have already set the time and
date, open the input field using the
menu (
¢ page 26))
The Date/Time submenu is shown on the
display.
¤ The active input position flashes.
Enter the month, day, and year as an
8-digit number using the keypad (e.g.,
Q4
2QQO
for 10/14/2009).
Date/Time
Date:
00/00/0000
Time:
00:00am
Back Save
Time
¤ Press the right or left Control
key to change the input posi-
tion and correct an entry.
¤ Enter the hours and minutes as
four-digit numbers using the keypad
(e.g., QM5
for 07:15 am).
Press the Display key am/pm to
change the am/pm setting. The
default setting is am.
Change the input position with
the Control key, if necessary.
¤ Press down on the Control key to switch
to the time input field.