EasyManua.ls Logo

Siemens HB36P572 - Sabbath Mode; Starting Sabbath Mode; Time-Setting Options; Setting the Timer

Siemens HB36P572
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Sabbath mode
When this setting is used, the temperature of the oven remains
at between 85 °C and 140 °C with Top/bottom heating. You
can set a time between 24 and 73 hours.
You can keep dishes in the cooking compartment hot for this
time without having to switch the oven on or off.
Starting Sabbath mode
Prerequisite: "Sabbath mode, yes" is activated in the basic
settings. See the Basic settings section.
1.Press the " button.
3D hot air and 160 °C are suggested in the display.
2.Turn the rotary selector anti-clockwise and select the Sabbath
mode.
3.Use the ¿ button to switch to the temperature and set the
temperature using the rotary selector.
4.Use the button 0 to open the Time-setting options menu and
switch to Cooking time with the
¿ button.
27:00 hours are suggested.
5.Turn the rotary selector to set the required cooking time.
6.Press the 0 button to close the Time-setting options menu.
7.Press the button.
The Sabbath mode starts.
The cooking time has elapsed
The oven stops heating.
Setting a later end time
It is not possible to set a later end time.
Cancelling Sabbath mode
Press and hold the
button until 3D hot air:, 160 °C
appears. You can make new settings.
Time-setting options
You can call up the time-setting options menu by pressing
the
0 button. The following functions are available:
If the oven is switched off:
Setting the timer
Setting the clock
If the oven is switched on:
Setting the timer
Setting the cooking time
Setting a later end time
Setting the timer
The timer runs independently of the oven. You can use it as a
kitchen timer and set it at any time.
1.Press the 0 button.
The time-setting options menu opens.
2.Set the running time for the timer using the rotary selector.
3.Press the 0 button to close the menu.
The display returns to its previous state. The
U symbol for the
timer appears, and the time can be seen counting down.
When the time has elapsed
A signal sounds. The display shows
U 0:00. You can cancel
the signal earlier by pressing the
0 button. Press the 0 button
to close the time-setting options menu.
Cancelling the timer time
Open the time-setting options menu using the
0 button and
turn the time back to 0:00. Press the
0 button to close the
menu.
Changing the timer time
Open the time-setting options menu with the
0 button and
change the running time for the timer in the next few seconds.
Press the
0 button to close the menu.
Setting the cooking time
If you set the cooking time for your dish, operation stops
automatically once this time has elapsed. The oven stops
heating.
Prerequisite: The type of heating and temperature must be set.
Example in the picture: setting for top/bottom heating, 180 °C,
cooking time of 45 minutes.
1.Press the 0 button.
The time-setting options menu appears.
2.Using the ¿ or ¾ button, move to the cooking time and set
the cooking time using the rotary selector.
3.Press the 0 button.
The time-setting options menu closes.
4.If the operation has not yet started, press the button.
You can see the
x cooking time counting down in the status
bar.

7LPHU
PLQVHF
&RRNLQJWLPH
PLQVHF

7\SHVRIKHDWLQJ

7LPHU
PLQVHF
&RRNLQJWLPH
PLQVHF

7\SHVRIKHDWLQJ

3UHKHDWLQJ
 
7RSERWWRPKHDWLQJ&

Table of Contents

Related product manuals