Cleaning function en
19
Keeping the appliance clean
Always keep the appliance clean and remove dirt
immediately so that stubborn deposits of dirt do not
build up.
:Warning – Risk of fire!
Loose food remnants, fat and meat juices may catch
fire. Before using the appliance, remove the worst of the
food remnants from the cooking compartment, heating
elements and accessories.
Tips
■ Clean the cooking compartment after each use. This
will ensure that dirt cannot be baked on.
■ Always remove flecks of limescale, grease, starch
and albumin (e.g. egg white) immediately.
■ Use the universal pan for baking very moist cakes.
■ Use suitable ovenware for roasting, e.g. a roasting
dish.
.Cleaning function
Cl eani ng f unct i on
The cleaning function is used to clean the self-cleaning
surfaces in the cooking compartment.
The self-cleaning surfaces (back panel, ceiling panel
and side panels) are coated with a porous, matt
ceramic material. Splashes of fat from roasting and
grilling are absorbed and broken down while the oven
is in operation. If the surfaces no longer clean
themselves adequately and dark patches appear, the
surfaces can be cleaned by the cleaning function.
Cleaning recommendation
The appliance saves how long it has been operated in
which cooking function. As soon as cleaning is
necessary, ’– appears in the display if you switch off
the appliance. You can dismiss this message by
pressing any button except the
A button. The prompt
will continue to be displayed, however, until the
cleaning function has been run in full.
Note: You can completely reset the cleaning
recommendation counter by pressing and holding the
A button for approximately four seconds.
The prompt does not reappear until the appliance has
been used a certain number of times again.
Caution!
If you do not act on this cleaning recommendation, the
self-cleaning surfaces in the cooking compartment may
become damaged.
If your appliance is already very dirty, e.g. because you
have used it to cook fatty poultry or roasts, or if you
notice dark patches on the self-cleaning surfaces, do
not delay running the cleaning function until this prompt
appears. The more often or the earlier the appliance is
cleaned, the longer the self-cleaning surfaces retain
their ability to clean themselves. You can clean the
cooking compartment at any time as required using the
cleaning function.
Note: The counter for the cleaning recommendation
prompt will be reset following a power failure. It is
therefore a good idea to run the cleaning function after
a power failure has occurred.
To Next Page
Loading...
