11
The cooking time has elapsed
A signal sounds. Microwave operation has finished. The status
bar shows
x 0:00. You can cancel the signal before it has
finished sounding by pressing the
0 button.
Opening the oven door during cooking
Operation is suspended.
† flashes. Press the † button again
after closing the oven door. The programme will then continue.
Pausing operation
Press the † button. The oven is paused, † flashes. Press
the
† button again, operation continues.
Changing the cooking time
This can be done at any time. Change the cooking time using
the rotary selector.
Cancelling operation
Press and hold the
† button until “Select function” appears in
the status line. You can now change the settings.
Combination
This involves the simultaneous operation of one type of heating
with the microwave. Using the microwave makes your meals
ready more quickly, and they are still nicely browned. You can
set a cooking time of up to 1 hour 30 minutes.
Suitable microwave power settings
Except for 1,000 W, you can combine any microwave power
setting with a heating type.
Setting a combination
Example in diagram: Top/bottom heating setting 200 °C and
microwave setting 360 W, 17 minutes.
1.Press the " button.
3D hot air, 160 °C is suggested in the display.
2.Turn the rotary selector to set the desired type of heating.
3.Use the ¿ button to switch to the temperature and set the
desired temperature using the rotary selector.
4.Press the button for the microwave power setting you require.
The button lights up.
5.Set the cooking time using the rotary selector.
6.Press the† button.
Appliance operation begins. The cooking time starts counting
down.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
x 0:00. You can cancel the signal early by pressing the 0
button.
Opening the oven door during cooking
Operation is suspended.
† flashes. Press the † button again
after closing the oven door. The programme will then continue.
Pausing operation
Press the
† button. The oven is paused, † flashes. Press
the
† button again, operation continues.
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Cancelling operation
Press and hold the
† button until “Select function” appears in
the status line. You can make new settings.
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.
To Next Page
Loading...
Need help?
General
