7
After-sales service products
You can obtain suitable care and cleaning agents and other
accessories for your domestic appliances from the after-sales
service, specialist retailers or (in some countries) online via the
eShop. Please specify the relevant product number.
Before using for the first time
This section tells you everything you need to do before using
the appliance for the first time.
■ Set the clock
■ Change the language for the text display as required
■ Change the supply voltage
■ Heat up the cooking compartment
■ Clean the accessories
■ Read the safety information at the front of the instructions for
use. It is very important.
Initial setup
Once your new appliance is connected, "Uhrzeit einstellen" (set
clock) appears in the status bar at the top. Set the time, and
also the text display language, if required. German is the default
language.
Setting the clock and changing the language
1.Turn the rotary selector to set the current time.
2.Move to "Sprache wählen: deutsch" (select language:
German) in the right-hand settings area using the
¿ button.
3.Select the desired language using the rotary selector.
4.Press the 0 button.
The language and time are saved. The current time is shown in
the display.
Note: You can change the language at any time. See the Basic
settings section.
Changing the supply voltage
Before you use your appliance for the first time, change the
supply voltage to 230240 V.
The supply voltage can be changed at any time.
See the Basic settings section.
Heating up the cooking compartment
To get rid of the new cooker smell, heat up the cooking
compartment when it is empty and the oven door closed.
Make sure that the cooking compartment contains no leftover
packaging, e.g. polystyrene pellets.
Ventilate the kitchen while the oven is heating up.
Set
% Top/bottom heating and a temperature of 240 °C.
1.Press the ‡ button.
The Siemens logo appears.
2.Immediately press the " button.
The : 3D hot air heating type and a temperature of 160 °C
are suggested.
3.Turn the rotary selector to change the type of heating to
% Top/bottom heating.
4.Move to the temperature using the ¿ button and change the
temperature to 240 °C using the rotary selector.
5.Press the † button.
Appliance operation begins.
6.Switch the oven off after 60 minutes using the ‡ button.
The time appears in the display.
The temperature indicator bars show the residual heat in the
cooking compartment.
For detailed information on how to set the type of heating and
temperature, refer to the Setting the oven section.
Cleaning the accessories
Before you use the accessories for the first time, clean them
thoroughly with hot soapy water and a soft dish cloth.
Glass roasting
dish
HZ915001 For pot roasts and bakes
that you prepare in the oven.
It is particularly suitable for
the automatic programmes.
Universal roasting
dish
HZ390800 For particularly large or
numerous portions. The
roasting dish has a granite
enamel exterior and an
ovenproof glass lid. The
glass lid can be used as a
gratin dish.
Special
accessories
HZ number Use
Cleaning cloths for stainless-steel surfaces Product no. 311134 Reduces the build-up of dirt. Impregnated with a special oil for
perfect maintenance of your appliance's stainless-steel
surfaces.
Oven and grill cleaning gel Product no. 463582 For cleaning the cooking compartment. The gel is odourless.
Microfibre cloth with honeycomb structure Product no. 460770 Especially suitable for cleaning delicate surfaces, such
as glass, glass ceramic, stainless steel or aluminium. The
microfibre cloth removes liquid and grease deposits in one go.
Door lock Product no. 612594 To prevent children from opening the oven door. The locks on
different types of appliance door are screwed in differently.
See the information sheet supplied with the door lock.
To Next Page
Loading...
Need help?
General
